Ceiling Mount Passive Infrared Occupancy & Daylight Sensor, Cresnet
Crestron® occupancy sensors and daylight sensors offer a powerful, cost-saving solution for reducing energy consumption and enhancing system functionality. As part of a complete Crestron system, they can be used to enable automation of lighting, shading, HVAC, and AV equipment in a conference room, classroom, office, hallway, or other space. Using Crestron sensors, room lighting can automatically turn on when the room is occupied, turn off when it is vacant, and dim to a lower level when there is sufficient natural daylight from windows and skylights. Sensors can also be used to enhance the capabilities of a room scheduling, asset management, or energy monitoring solution through integration with the Crestron Fusion® Enterprise Management service.
| IP Rating | |
|---|---|
| Dimension | |
| Power | |
| Motion Sensing | |
| Sensor Technology | Passive infrared, 64 detection zones |
| Detection Area | 450 sq ft (42 m²) |
| Detection Pattern | Rectangular 18.57 x 24.34 ft (5.66 x 7.42 m) with 8.2 ft (2.5 m) ceiling height |
| Maximum Ceiling Height | 16.4 ft (5 m) |
| Light Sensing | |
| Sensor Technology | Closed-loop photocell |
| Light Sensitivity | 0 to 1000 Iux (O to 93 foot-candles) |
| Field of View: | 360⁰ hemispherical |
| Controls & Indicators | |
| LED | Bi-color red/green LED, indicates detection of motion and other |
| functions during setup (may also be enabled to indicate detection | |
| of motion during normal operation if desired) | |
| Beep Tone | Indicates detection of motion and other functions during setup |
| IR Remote (Sold Separately) | |
| OCC/VAC/EXIT SETUP | Enters or exits occupancy or vacancy setup mode |
| TIMEOUT | Selects 0.5, 2, 5, 10, 15, or 30 minutes |
| SHORT TIMEOUT | Enables or disables "walk-through" mode, which temporarily sets timeout to 60 seconds if occupancy is detected for less than 90 seconds |
| LED | Enables or disables visible indication of motion detection during normal operation |
| PIR SENSITIVITY | Selects high, medium, low, or off |
| SET ID | Enables network ID to be set using the numeric keypad |
| RESET | Restores factory settings |
| FORCE VAC | Puts sensor into vacant state |
| Connections | Flying leads, color-coded for connection to the Cresnet control network |
EN
